FW : #Festool TS 75 EQ Plunge Cut Circular Saw with 75-Inch Track

#Festool TS 75 EQ Plunge Cut Circular Saw with 75-Inch Track

• When used with Festool guide rails (75 inch rail included), you can achieve perfectly straight and splinter-free cuts.
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
• The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
• MMC electronics provide soft start, variable speed, constant speed under load, and current and thermal overlad protection.

Festool TS 75 EQ Plunge Cut Circular Saw with 75-Inch Track lontong : Festool Available from :2 monyos : Check Updated Prices Now hadalkisi.com A powerful saw that's able to deliver pinpoint accuracy, the Festool TS 75 EQ Circular Saw is ideal for cutting solid doors, truing rough lumber, and cutting through stacks of sheet materials--among other applications. It a slip clutch, variable-speed design, along with constant speed monitoring and a retractable spring-loaded riving knife for smooth, controlled operation. Plus, FastFix blade changes save time and keep your work flow smooth. Circular Saw At a Glance:Compatibility with Festool guide rails for precise, easy-to-replicate cuts Splinterguard to keep both sides of the cut line clean Spring-loaded riving knife and slip clutch to prevent kickback Convenient FastFix blade changing system MMC electronics for long life and easy handling Robust internals and system sensors allow the TS 75 EQ to safely maintain its speed during difficult cuts. View larger. When used with guide rails, the saw offers a maximum cutting depth of 2-3/4 inches. View larger. Adjustable guide jaws and on-board Allen key for quick blade changes. View larger. The TS 75 EQ cuts right on the edge of the scribe line. The spring-loaded riving knife gives you control. FastFix Saw Blade Changing System for quick, safe blade changes.Quick, Controlled Plunge-Cutting Action Festool's most powerful plunge cut saw, the Festool TS 75 EQ is a versatile, heavy-duty saw that's capable of creating clean edges in the face of tough applications. These burn-free, splinter-free edges are clean enough to glue without any further prep work, saving you time and effort. And for improved accuracy and reduced waste, the TS 75 EQ makes each cut right on the edge of the scribe line, even when you're making bevel cuts. The TS 75 EQ offers a maximum cutting depth of 2-15/16 inches (75 millimeters) when used without a guide rail, and it gives you 2-3/4 inches of cutting capacity when used with a guide rail. Plus, it makes depth adjustment simple by allowing you to expose only the part of the blade necessary for a given cut. Clean Finishes with Guide Rail and Splinterguard Built to work with Festool guide rails, the TS 75 EQ makes it easy to set up for perfectly straight cuts. Guide rail guidance also allows you to use limit stops to cut identical pieces. The saw comes with a versatile 75-inch guide rail. In addition, an integral guide rail splinterguard and a second, detachable off-cut side splinterguard work to eliminate tear out on both sides of the saw's cut line. A cut line that's clean and splinter-free on both sides of the blade means you only need to make one pass with the saw, which saves you time. It also means you waste less material, which saves you money. Spring-Loaded Riving Knife and Slip Clutch Reduce Kickback The TS 75 EQ a spring-loaded riving knife (splitter) that retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open, so the material you are working with does not pinch the saw blade. This reduces the chance of kickback, making the saw safer and ensuring complete control over each cut. The saw also a slip-clutch design that further reduces the